Configuring Topology network equipment Juniper

mohinh-juniper

Continue with the basic article on Juniper devices, network security today actual models configured with:

– VLAN in the floor, with each VLAN routing

– Configuration 2 way physical lumped into one logical to increase the bandwidth and speed, backup

– Configuring Static route

– DHCP Relay

(Refer to the basic article here 🙂

Create VLAN, all VLAN must be created in Core

set vlans Floor1 vlan-id 10

set vlans Floor2 vlan-id 20

set vlans Floor3 vlan-id 30

Defines the interface group

    set chassis aggregated-devices ethernet device-count 2

Intercafe group configuration (each with 2 lines logic 802.3ad ae0 physical way)

This road connects the switch to the router to the Internet EX

delete interfaces ge-1/0/44

delete interfaces ge-1/0/45

set interfaces ge-1/0/44 ether-options 802.3ad ae0   // ae0  logic

set interfaces ge-1/0/45 ether-options 802.3ad ae0   // ae0  logic

Cấu hình group interface mode trunk

set interfaces ae0 unit 0 family ethernet-switching port-mode trunk   // ae0 is trunk

Assign IP to interface group

set interfaces ae0 unit 0 family inet address 172.17.0.2/30

Assign the VLAN trunk interface

set interfaces ae0 unit 0 family ethernet-switching vlan members all

Create default-gateway to route internet travel

set routing-options static route 0.0.0.0/0 next-hop 172.17.0.1 //STATIC ROUTE

Assign VLAN interface as the gateway for the VLAN

set interfaces vlan unit 10 family inet address 172.16.10.1/24

set interfaces vlan unit 11 family inet address 172.16.11.1/24

set interfaces vlan unit 12 family inet address 172.16.12.1/24

Configuring DHCP-Replay Agent

set forwarding-options helpers bootp server 172.16.0.11

// Ip server cấp DHCP

set forwarding-options helpers bootp interface vlan.10

// Vlan need DHCP

set forwarding-options helpers bootp interface vlan.20

// Vlan need DHCP

set forwarding-options helpers bootp interface vlan.30

// Vlan need DHCP

Inter-VLAN configuration to route the VLANs together

set vlans Floor1 l3-interface vlan.10

set vlans Floor2 l3-interface vlan.20

set vlans Floor3 l3-interface vlan.30

Save the configuration to the device

commit

Lượt xem (1095)

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *